How To Make Clothes Out Of Animal Hide

Download Article

Download Commodity

If you hunt deer and other animals for their meat, why not use their hides likewise? Treating a hide with a tanning process ensures you'll end up with a supple piece of leather that tin be used to make shoes and article of clothing or hung on the wall. Read on for 2 methods for tanning a hide: a traditional method that requires using the animal'south natural brain oils and a quicker chemical method.

1. 1

   Flesh the hide. Fleshing the hide is the process of scraping off the flesh and fat, which prevents the hide from rotting. Place the hide on a fleshing beam (a beam designed to hold the hide in place equally you work) or on a tarp on the ground. Use a fleshing bract to scrape off all visible traces of flesh and fatty using quick, potent strokes.

   • Flesh the hide immediately subsequently cutting the hide from the brute's body. If you wait more a few hours, the hide will begin to decompose, and information technology volition fall apart during the tanning process.
   • Be careful not to impairment the hibernate as you scrape. Don't apply a knife not intended to be used for fleshing, since information technology might puncture or scratch the hide.

2. 2

   Launder the hide. Use clean water and lather made from natural substances to launder away dirt, claret, and other impurities before you lot brainstorm softening the skin.

   Advertisement

3. 3

   Dry the hibernate. Let it dry out for a few days to prepare it for the tanning procedure. Bore holes along the edge of the hide and apply twine to attach it to a drying rack. These wooden racks, which can be purchased at game shops, hold the hide in place as information technology thoroughly dries.

   • Make sure that the hide is actually stretched, non just hung, on the drying rack. The more the hide is stretched, the larger information technology will be once the tanning process is consummate.
   • If you stretch your hide over a wall or barn, make sure there'south ample space for air to circulate betwixt the hide and the wall, or information technology won't dry properly.
   • The drying process can take upwards to a week, depending on your climate.

4. 4

   De-pilus the hibernate. Accept the hibernate off of the dryer and use a rounded steel blade with a handle or an elk antler hide scraper to remove the hair from the hide. This ensures that the tanning solution can thoroughly soak the skin. Carefully scrape the pilus and the epidermis from the hide.

   • If the hair is long, cutting it start. Scrape confronting the grain of the hair, and scrape away from yourself.
   • Be careful virtually the belly expanse, since the skin there is thinner than the pare on the residuum of the hide.

5. 5

   Brain the hibernate. The oils in an beast's brain provide a natural tanning method, and each beast has a brain simply large plenty to tan its entire hide. Cook the creature's brain in a cup of water until the brain breaks down and the mixture resembles soup. Place it in a blender so it is completely smooth. Have the following steps to utilize the brain to the hibernate:

   • Wash the hide with water. This removes any remaining grease and droppings and makes the hide more malleable, so it will exist better able to absorb brain oils.
   • Wring the hide out, so information technology will be able to take in the oils. Squeeze out the excess h2o past placing the hibernate betwixt two towels and squeezing, then repeating the process with ii dry towels.
   • Rub the brain mixture into the hide. Make sure you lot comprehend every inch of the hide.
   • Scroll upwards the hide and store it in a large plastic freezer bag or food storage handbag. Put it in the refrigerator to allow the brains soak in for at least 24 hours.

6. 6

   Soften the hibernate. Now that the oils accept soaked into the hibernate, it'due south ready for softening. Take the hide out of the refrigerator and identify information technology back on the drying rack. Wipe off as much of the brain mixture as possible. Use a heavy stick or a hide breaker to soften the hide by running the tool dorsum and forth beyond it.

   • Y'all tin can as well have a partner assist you stretch and soften it by taking it off the drying rack and pulling on the edges from either side. Continue doing so until you are both tired, then place it dorsum on the rack and apply the hide billow to go on working the hide.
   • A heavy rope can besides be used to soften the hide. Have a partner hold one side of the rope and work together to rub it back and forth against the hide.

7. 7

   Fume the hibernate. When the skin is soft, pliable, and dry it is set to be smoked. Stitch up any holes in the hide, then sew information technology up the sides of the hide to make a bag. Close one end and then it is tight enough to concord the smoke. Capsize the peel pocketbook over a pigsty about a foot across and half that deep. Use sticks to make a rough frame to agree the skin handbag open, and tie the closed end to a tree or utilise another long stick to keep it held upwardly. Build a small-scale, smoky fire within the pocketbook to smoke the pare.

   • Once the footling fire has a coal bed congenital up, start adding smoke chips to information technology and peg the skin effectually the pigsty. A little channel tunneled out to one side will permit you to keep the fire supplied.
   • After smoking the first side for one-half an hr, turn the bag inside out and smoke the other side.

Advertisement

1. ane

   Flesh the hide. Fleshing the hide is the process of scraping off the mankind and fatty, which prevents the hide from rotting. Place the hide on a fleshing beam (a axle designed to agree the hibernate in place as yous piece of work) or on a tarp on the ground. Apply a fleshing blade to scrape off all visible traces of flesh and fat using quick, strong strokes.

   • Flesh the hide immediately after cutting the hide from the animal's body. If you wait more than a few hours, the hide will begin to decompose, and it will fall apart during the tanning procedure.
   • Be careful non to damage the hide as you lot scrape. Don't use a knife not intended to be used for fleshing, since it might puncture or scratch the hide.

2. 2

   Common salt the hide. After fleshing, immediately lay the hide in the shade on a tarp and cover it with three to 5 pounds of salt. Make sure it is completely coated.

   • Over the course of a couple of weeks, go on salting the hide until it has get crispy.
   • If you lot see a pool of liquid emerge from an surface area of the hide, embrace it with more salt.

3. iii

   Assemble tanning equipment. Tanning solution is made from a combination of household ingredients and chemicals you lot'll need to source elsewhere.^[one] Assemble the following ingredients:

   • 2 gallons (7.6 L) water
   • 1 1/two gallons (7.6 L) bran flake water (Make this past boiling 1 1/2 gallons of water and pouring it over a pound of bran flakes. Allow the mixture sit for one hour, then strain and reserve the water.)
   • 8 cups salt (non iodized)
   • ane 1/4 cups battery acid
   • 1 box baking soda
   • ii large trash cans
   • one large stick, for stirring and moving hides

4. iv

   Tan the hide. Begin by soaking the hide in clean water until information technology is soft and pliable, so it will absorb the tanning chemicals more easily. When the hide is set up to tan, peel off its dried inner pare. Then take the following steps to tan the hide:

   • Put the salt in a trash can and pour 2 gallons (7.6 L) of boiling h2o inside. Add the bran scrap water and stir until the common salt has completely dissolved.
   • Add together the battery acid. Brand certain yous wear gloves and accept other precautions to prevent getting burned.
   • Put the hibernate in the trash tin can, punching it downwards with the stick to brand sure it is completely covered in liquid. Let information technology soak for 40 minutes.^[2]

5. 5

   Wash the hide. Make full the second trash can with clean water while the hide is soaking in the tanning solution. Later on forty minutes have passed, use the stick to move the hide from the tanning solution to the clean water. Swish it around to wash off the solution. When the water looks dirty, pour it out, refill information technology with clean h2o, and wash the hibernate for some other 5 minutes.

   • If you plan to utilize the hibernate to brand clothing, add a box of baking soda to the rinse to neutralize the remaining acrid. This will foreclose the acid from harming people'southward skin.
   • If you don't plan to use the hide to brand clothing, you tin forgo the box of blistering soda, since in neutralizing the acid it lessens the acrid'due south effectiveness in preserving the hide.^[iii]

6. 6

   Drain and oil the hide. Remove the hibernate from the rinse and hang over a beam to drain. Swab it with neat foot oil^[iv] to status the peel.

7. vii

   Stretch the hide. Hang the hide on a stretcher or hibernate dryer to finish the process. Place it in a identify out of the sun to dry.

   • Later a few days the hide should experience dry and flexible. Take it down from the rack and go over the skin side with a wire brush until it has a suede-like appearance.^[five]
   • Allow the hide finish drying until it is fully dry, which should take a few more days.

Advertisement

Add together New Question

• Question

  How do I tan a hide like a Native American and without using any mod technologies?

  

  Natives still had Admission to common salt, fume and water, and also used the animal'due south urine to help cure the hibernate. At that place is a curing process that was accomplished with these techniques, only with more primitive methods, similar using stone or drinking glass to cut away the mankind instead of modern steel or aluminum.

• Question

  These methods both involve losing the pilus. What if yous want to retain it to use as a fur?

  

  Skip the hair removal step, then rub the brain solution onto the blank side, working information technology in thoroughly. Fold the hide in such a style that the brain solution doesn't get onto the fur side. And then follow the rest of the steps.

• Question

  Why practice I have to take the pilus off?

  

  Taking the hair off is mostly for aesthetic purposes. Many people find hairless leather easier to accept care of than fur. If you really want to, you lot can leave the hair on. Be certain to only utilize the solutions to the leather side, and non the pilus side.

• Question

  How practice y'all tan a hibernate if you lot want to keep the hair on the hide?

  

  Try using Borax laundry detergent. Flesh the hide, cover it in Borax and permit it sit down for 3-4 days.

• Question

  What tin can I do to hold a hide for several months before tanning?

  

  Peradventure endeavor salting the hides well, drying them and storing them in a dry place. The hides must be soaked in water to release the salt before tanning.

• Question

  Can you lot tan a hide after it has been frozen?

  

  Aye. Information technology may take a little more piece of work to become information technology to soften, but you can keep pelts for six months or more than in the freezer. If you kept the confront on a pelt, the freezer would practise damage to the nose, lips and eyelid areas, and they wouldn't expect every bit good.

• Question

  What kind of salt can I employ to tan a hide?

  

  Stone common salt is more h2o absorbent. Bounding main salt tends to corrode the leather.

• Question

  How tin can I keep the encephalon fresh while drying the hide?

  

  Put it in a Ziploc or rubber storage container in the fridge. If it's going to have yous a while yous can put it in the freezer and take it out to thaw in the refrigerator the mean solar day before you're ready to utilise it.

• Question

  How do I tan a hide and have information technology become soft?

  

  Later you tanned it, while it's still moist, pull and stretch and work information technology over an edge until it's completely dry out.

• Question

  What tin I use to flesh a hibernate if I don't have a fleshing tool and axle?

  

  Apply a blunt knife or other bract. You can also use a sharp knife, but be gentle.

Meet more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Ad

Video

• Dried corn cobs smoke very well and give the skins a xanthous colour.

• If y'all put some wood ash from a bivouac in the water while it soaks, the hair should pull out very easily. It makes the h2o a diluted lye solution.

• White pine fume tends to make black hides.

• Prior to smoking the hide, be certain to collect a stock of cedar and soak it. The moisture cedar volition smoke bang-up without flaring up and dissentious the hibernate. That said, never go out your hide unattended during the smoking process.

Thanks for submitting a tip for review!

Advertisement

• While the hides are smoking, stay right there and keep an eye on the fire.

• Always wear gloves and center protection when treatment battery acid, as information technology is corrosive and can burn the skin and eyes.

• Be very careful when you are scraping and stretching the hide. Work away from yourself. Scraping and stretching tools shouldn't be sharp, only because you are applying pressure, they can hurt yous if you slip.

Ad

About This Article

Commodity Summary X

If you've already scraped the flesh from a hide and want to tan it, start by washing it with water and natural soap to get rid of blood and clay. Next, stretch out the hibernate over a drying rack for a few days. When the hibernate is dry, scrape the hair off so the tanning solution can soak into the pare more easily. To make the tanning solution, melt the deer's brain with water until it breaks downward, then rub the oil into the hide. Finally, put the hibernate in a freezer bag and store it in the fridge for 24 hours to allow the oils to soak in. To acquire how to soften the hide and how to smoke it, read on!

Did this summary help yous?

Thanks to all authors for creating a folio that has been read 734,967 times.

Did this article help you lot?

Source: https://www.wikihow.com/Tan-a-Hide

Posted by: blanksenone1940.blogspot.com

Share this post